We’re a small 3rd generation family company specializing in Sealcoating, Asphalt Patching, Stripping & Crack Filling. Taught by my mother who was taught by her father, we value family in our business.
We specialize in parking lots , asphalt maintenance , driveways
licensed & insured
HOT Rubber crack filler
When covered with a dark black sealant, pavement looks and wears like new. Parking lot sealcoating helps to project a positive image of the company, facility, or residential complex.
Sealcoating fills surface voids, which reduces exposure to oxygen and UV rays and reduces the depth to which oil or gas can penetrate the pavement.
Sealcoating acts as a waterproofing agent, minimizing the rate at which water enters pavement. Without it, water can permeate more freely resulting in freeze/thaw expansion and contraction of the pavement.
Gasoline dripping from a topped-off fuel tank during hot weather can soften and break down unsealed asphalt pavements. Coal tars used in sealcoat are impervious to gas and oil spills.
Sealcoats fill surface voids while coating the pavement surface. The resulting smooth and even texture makes the surface easier to maintain year-round. For example, snow is easier to remove from a smooth surface, and sweeping is far more effective on a smooth surface.
Sealcoat brings a dark black color to the pavement. The blacker it is, the more heat a pavement draws from the sun. And, the hotter it gets, the more pliable it becomes, which helps it to withstand traffic without cracking.
Restaurant parking lots often extend to areas near dumpsters, where food-processing machines are pressure washed. Food waste near the dumpsters may also need to be washed away if it can’t be swept away. Sealcoating protects asphalt cement from the high-volume water pressure and detergents used in pressure washing.
The price of asphalt will always be affected by crude oil prices, which fluctuate when supplies vary. Sealcoating preserves asphalt for pennies per square foot.
Prior to pavement sealing, any structural failures or cracks on the pavement must be repaired. All potholes must be removed and replaced, cracks must be cleaned and filled, and oil spots cleaned or primed.
Once the pavement is ready, the application can proceed as outlined.
Sealcoating should only be performed under the proper weather conditions.
The recommended air and pavement temperature should be at least 55 degrees Fahrenheit and rising during sealer application and for 8 hours afterward.
Traffic should be kept off a newly sealed surface for a minimum of 18 to 36 hours to allow for drying (curing) time. If this time frame is not practical, midwest seal coating will perform sealcoating in separate mobilizations to maximize convenience. It is also important to refrain from using sprinklers near the area, hosing down, or washing the area for 48 hours before and after work is completed.
We use only the finest commercial asphalt pavement sealers specifically designed for the toughest climate conditions and we guarantee our work for one (1) full year. Our goal is 100% customer satisfaction. With seal coat it will be a (4) year guarantee
CALL AND ASK ABOUT A FREE ESTIMATE